Custom Slipcase Boxes
Slipcases are used where the contents are the presentation and the packaging is a frame around them. Book sets, collector editions, sample kits and product trays all use the format, and all of them fail the same way when the fit is wrong.
Bulk pricing
From $0.38 per unit
At a 50 unit minimum. Final price depends on size, material, and finishing.
Key Takeaway
A slipcase is an open ended sleeve that a book, tray or inner box slides into. The critical measurement is the friction fit: too loose and the contents fall out, too tight and the spine is damaged going in. It is built to the packed stack, so every item that goes inside must be measured together rather than individually. Half Price Packaging orders start at 50 units, with 100 or more required for specialty rigid formats. Production runs from about 7 business days, plus 2 to 5 business days for delivery. Call (866) 225-2112.
Half Price Packaging produces slipcases as wrapped rigid builds and as folded board constructions, printed on the visible faces and the spine. Orders start at 50 units, with 100 or more required for specialty rigid formats. Call (866) 225-2112 with the packed stack dimensions.
Measure the packed stack, all of it at once
Stack everything that goes inside exactly as it will be packed and measure the block. Individual measurements added together will be wrong, because covers compress and trays nest.
Send the stack weight too. A heavy stack in a slipcase puts load on the open end, and that is where a light construction gives way first.
Getting the friction fit right
The contents should slide in with light resistance and stay put when the case is held upside down. That is a small tolerance, and it is the single specification that decides whether a slipcase feels well made.
A thumb notch or a finger cut out makes retrieval easier without loosening the fit. It is a dieline feature, so ask for it before tooling rather than after.
Rigid wrapped or folded board
A wrapped rigid slipcase gives the weight and squareness expected of a collector edition, and it holds shape when the contents are removed. It requires 100 or more units as a specialty rigid format.
A folded board slipcase costs less, ships flat and suits lighter contents and higher volumes. Both take full printing, foil and embossing.
Printing the spine and the visible faces
A slipcase on a shelf is seen spine first, so the spine has to carry the title or brand legibly at the actual width. Narrow spines need condensed type and careful proofing.
The interior of the case is only glimpsed, so printing it adds little. Spend the finishing budget on the outer faces, the spine and a foil or debossed mark instead.
Quantities, tooling and quoting
Orders start at 50 units, with 100 or more required for specialty rigid formats. A slipcase needs its own dieline, which is a first run step that reorders of the same size do not repeat.
For a quote, send the packed stack dimensions and weight, the construction, the finishes, whether you want a thumb notch, the quantity and the destination. Call (866) 225-2112.
Frequently asked questions
How do I measure for a slipcase?
Stack everything that goes inside exactly as it will be packed and measure the block as one. Individual measurements added together will be wrong, because covers compress and trays nest. Send the stack weight as well.
How tight should a slipcase be?
The contents should slide in with light resistance and stay put when the case is held upside down. It is a small tolerance and it is the specification that decides whether a slipcase feels well made or cheap.
Can the case have a thumb notch?
Yes. A thumb notch or finger cut out makes retrieval easier without loosening the fit. It is a dieline feature, so ask for it before tooling rather than after the die has been cut for the first run.
Rigid wrapped or folded board?
A wrapped rigid slipcase gives the weight and squareness expected of a collector edition and holds shape when emptied, requiring 100 or more units. A folded board case costs less, ships flat and suits lighter contents at volume.
What should be printed on a slipcase?
The spine and the visible outer faces. A slipcase on a shelf is seen spine first, so the title or brand has to be legible at the actual spine width. The interior is barely glimpsed and rarely worth printing.
How long do custom slipcase boxes take?
Production runs from about 7 business days, depending on the product, quantity and finishing, plus 2 to 5 business days for delivery. Wrapped rigid builds with foil sit at the longer end of that range.
Why buyers order from Half Price Packaging
- Orders start at 50 units, with 100 or more for specialty rigid formats
- Free design assistance and a digital proof approved by you before production
- Free shipping across the US
- Size guides and spec tables published from real production data
- Production runs from about 7 business days, depending on the product, quantity, and finishing, plus 2 to 5 business days for delivery
- Talk to a packaging specialist at (866) 225-2112
Related products
Further reading
Try Before You Commit - To Us
We’re sure you’ll love what we offer. Request your samples today, and if you place an order within 30 days of receiving them, we’ll credit the cost of your samples-making them absolutely free!
